Lexmark Printer J110 Manual de usuario descargar pdf (Pagina 194)

4-34 Service Manual

4085-001

Encoder Disk Feed Roller Assembly Removal

1. Remove the rear cover. Refer to “Rear Cover Removal” on

page 4-3.

2. Remove the operator panel cover. Refer to “Operator Panel

Cover/Operator Panel Removal” on page 4-5.

3. Remove the exit tray cover. Refer to “Exit Tray Removal” on

page 4-5.

4. Remove the left cover. Refer to “Left Cover Removal” on

page 4-7.

5. Remove the thrust bracket CBM {A}.

6. Remove the index board assembly.

7. Remove the five backup roller springs {B}. Note orientation of

springs before removing.

8. Remove the encoder disk feed roller assembly through the left

side of the printer.

Note: The index card and the encoder disk feed roller must be

replaced as a matching set. See “Index Card Assembly Removal” on

page 4-22. Also replace the thrust bracket and the cleaning roller.

1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 247 248

Sin comentarios

Lexmark Printer J110 Manual de usuario Pagina 194