Lexmark Printer J110 Manual de usuario Pagina 187

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 248
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 186
Repair Information 4-27
4085-001
Frame From Base Removal
1. Remove all covers. Refer to Rear Cover Removal on page 4-3.
2. Remove the power supply. Refer to Power Supply Removal on
page 4-19.
3. Remove the maintenance tank through the rear of the printer.
4. Disconnect (J2) the transport carrier motor from the engine
board.
5. Disconnect (J17) the paper port II from the engine board.
6. Disconnect the star wheel follower spring {A} from the base
assembly.
7. Remove the four screws {B} from the left side frame plate.
8. Remove the two screws {C} on the right side frame plate.
9. Before placing the printer on its back, remove the PerfectFinish
applicator to prevent spilling.
10. Place the printer on its back and remove five screws {D} from
the base.
11. Lift and slide the frame forward and remove.
Vista de pagina 186
1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 247 248

Comentarios a estos manuales

Sin comentarios