Lexmark Printer J110 Manual de usuario descargar pdf (Pagina 180)

4-20 Service Manual

4085-001

Pump Housing/Maintenance Station/Ink Waste Tank/

Transport Carrier Motor Removal

1. Remove all covers.

2. Remove the power supply. Refer to “Power Supply Removal” on

page 4-19.

3. Slide the ink waste tank out the rear of the printer. Note the

routing of the hose into tank.

4. Remove the carrier belt. Refer to “Engine Board /Cover

Removal” on page 4-14.

5. Disconnect transport carrier motor cable from engine board.

6. Remove three screws {A} from the transport carrier motor

bracket.

7. Remove the motor and bracket.

8. Loosen the screw on the maintenance bracket and depress the

spring, then retighten the screw.

9. Remove the spring from the rear of the maintenance station.

10.Remove the screw {B} from the right side of the frame that

secures the pump housing maintenance station assembly.

11.Push in the guide post {C} and move the pump housing

maintenance station assembly forward and down to disconnect

it from the shaft.

12. Slide the assembly out the rear of the printer and remove.

1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 247 248

Sin comentarios

Lexmark Printer J110 Manual de usuario Pagina 180