Lexmark Printer J110 Manual de usuario descargar pdf (Pagina 125)

Diagnostic Aids 3-31

4085-001

Ink Level Sensor Test

This test determines if the ink level sensor is working correctly. To

run the test, select Ink Level Sensor Test from the BASE SENSOR

TESTS menu. The following screen is displayed:

First the printheads are uncapped. The printheads move to the

middle of the frame so that the servicer has unobstructed access to

the ink-level sensor. Once the printheads have been presented, the

analog ink-level sensor value begins updating in real time. The

servicer can affect this value by waving a magnet in front of the

sensor.

When the test is ended using the operator panel (Return or Stop),

the carrier is homed and the printheads are capped.

Diagnostics (Mode 2) - Subsystem Tests

Uncap Printheads

Selection of this operation initiates a printhead uncapping. After

selecting this, the following screen is displayed for 1 second:

After uncapping, this test will automatically exit.

Cap Printheads

Selection of this operation initiates a printhead capping. After

selecting this, the following screen is displayed for 1 second:

Ink Level Sensor Test

Level = - 602

Printheads Uncapped

Printheads Capped

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 247 248

Sin comentarios

Lexmark Printer J110 Manual de usuario Pagina 125