Lexmark Printer J110 Manual de usuario descargar pdf (Pagina 120)

3-26 Service Manual

4085-001

The power indicator blinks indicating the test is in process. The

printer continually runs the same test until canceled from the

operator panel (by pressing Return or Stop).

Each time the test finishes, the screen is updated with the result. If

the test passes, the Pass Count is incremented by 1. However, if the

test fails, one of the following failure messages is displayed for

approximately 3 seconds and the Fail Count is incremented by 1.

• Sync Busy Error

• Byte Interrupt Request Error

• Strobe Interrupt Request Error

• Init Fall Error

• Init Busy Error

• Init Rise Error

• Host Busy Error

• RAM Data FF Error

• RAM Data AA Error

• RAM Data 00 Error

• RAM Data 55 Error

• DMA Count Error

• DMA Address Error

• DMA Interrupt Error

• DMA Memory Error

• DMA Background Error

• Clear Init Rise Error

• False Init Rise Error

• False Init Fall Error

• Autofeed Rising Interrupt Error

• Clear Autofeed Rise Error

• False Autofeed Rise Error

• Autofeed Falling Interrupt Error

• Clear Autofeed Fall Error

Once the maximum pass count or fail count is reached, the test is

stopped and the final test results are displayed. Press Return or

Stop to exit the test.

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 247 248

Sin comentarios

Lexmark Printer J110 Manual de usuario Pagina 120