Lexmark X736DE Guía de usuario Pagina 158

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 338
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 157
Menu item Description
Portrait Height
3–14.17 inches
76–360 mm
Sets the portrait height
Notes:
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
14 inches is the US factory default setting. Inches can be increased in
0.01-inch increments.
356 mm is the international factory default setting. Millimeters can
be increased in 1-mm increments.
Feed Direction
Short Edge
Long Edge
Specifies the feed direction
Notes:
Short Edge is the factory default setting.
Long Edge appears only if the longest edge is shorter than the
maximum width supported in the tray.
Reports menu
Reports menu
Note: When you select a menu item from the Reports menu, the indicated report prints.
Menu item Description
Menu Settings Page
Prints a report containing information about paper loaded into trays, installed
memory, the total page count, alarms, timeouts, the printer control panel
language, the TCP/IP address, the status of supplies, the status of the network
connection, and other information
Device Statistics Prints a report containing printer statistics such as supply information and
details about printed pages
Network Setup Page
Prints a report containing information about the network printer settings, such
as the TCP/IP address information
Note: This menu item appears only for network printers or printers connected
to print servers.
Network <x> Setup Page
Prints a report containing information about the network printer settings, such
as the TCP/IP address information
Notes:
This menu item is available when more than one network option is installed.
This menu item appears only for network printers or printers connected to
print servers.
Understanding printer menus
158
Vista de pagina 157
1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 337 338

Comentarios a estos manuales

Sin comentarios