Lexmark X950de Guía de usuario Pagina 333

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 372
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 332
Light colored line, white line, or incorrectly colored line appears on prints
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
Try one or more of the following:
MAKE SURE THERE IS NO DEFECTIVE TONER CARTRIDGE
Replace the defective toner cartridge.
MAKE SURE THE PHOTOCONDUCTOR UNIT IS NOT DEFECTIVE
Replace the defective photoconductor unit.
MAKE SURE THE TRANSFER MODULE IS NOT DEFECTIVE
Replace the defective transfer module.
CLEAN THE PRINTHEAD LENSES
1 Open the front door, and then the internal cover.
2 Locate the printhead wipers.
3 Gently pull the printhead wiper out until it stops, and then slowly slide it back into place.
4 Clean the remaining three printhead lenses.
Paper curl
Try one or more of the following:
CHECK THE PAPER TYPE AND WEIGHT SETTINGS
Make sure the paper type and weight settings match the paper loaded in the tray or feeder:
1 From the printer control panel Paper menu, check the Paper Type and Paper Weight settings.
2 Before sending the print job, specify the correct paper type setting:
For Windows users, specify the paper type from Print Properties.
For Macintosh users, specify the paper type from the Print dialog.
LOAD PAPER FROM A FRESH PACKAGE
Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it.
Troubleshooting 333
Vista de pagina 332
1 2 ... 328 329 330 331 332 333 334 335 336 337 338 ... 371 372

Comentarios a estos manuales

Sin comentarios