Lexmark X950de Guía de usuario descargar pdf (Pagina 110)

• Press—Use when the original document was printed using a printing press.

• Other—Use when the original document was printed using an alternate or unknown printer.

7 Touch > Copy It.

Collating copies

If you print multiple copies of a document, then you can choose to print each copy as a set (collated) or to print the

copies as groups of pages (not collated).

Collated Not collated

By default, Collate is set to On. If you do not want to collate your copies, then change the setting to Off:

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine

clippings) into the ADF. Place these items on the scanner glass.

2 If you are loading a document into the ADF, then adjust the paper guides.

3 From the home screen, navigate to:

Copy > enter the number of copies > Collate > Off >

> Copy It

Placing separator sheets between copies

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine

clippings) into the ADF. Place these items on the scanner glass.

2 If you are loading a document into the ADF, then adjust the paper guides.

3 From the home screen, navigate to:

Copy > Advanced Options > Separator Sheets

Note: Collate must be set to On for the separator sheets to be placed between copies. If Collate is set to Off,

then the separator sheets are added to the end of the print job.

4 Select one of the following:

• Between Copies

• Between Jobs

• Between Pages

• Off

5 Touch , and then Copy It.

Copying 110

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 371 372

Sin comentarios

Lexmark X950de Guía de usuario Pagina 110