Lexmark XC2132 Guía de usuario Pagina 292

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 341
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 291
Action Yes No
Replace the imaging kit, and then resend the print job.
Is the print density uneven?
Contact
customer
support.
The problem is solved.
Vertical voids appear on prints
Leading edge
Trailing edge
Action Yes No
Step 1
a Check if your software program is using a correct fill pattern.
b Resend the print job.
Do vertical voids appear on prints?
Go to step 2. The problem is solved.
Step 2
a From the Paper Menu on the printer control panel, check the paper
type and paper weight.
b Resend the print job.
Do vertical voids appear on prints?
Go to step 3. The problem is solved.
Step 3
Check if you are using a recommended type of paper.
a Load paper source with a recommended type of paper.
b Resend the print job.
Do vertical voids appear on prints?
Go to step 4. The problem is solved.
Step 4
a Remove, and then reinstall the imaging kit.
Warning—Potential Damage: Do not expose the imaging kit to
direct light for more than 10 minutes. Extended exposure to light
may cause print quality problems.
Warning—Potential Damage: Do not touch the underside of the
imaging kit. This could damage the imaging kit.
b Resend the print job.
Do vertical voids appear on prints?
Go to step 5. The problem is solved.
Troubleshooting 292
Vista de pagina 291
1 2 ... 287 288 289 290 291 292 293 294 295 296 297 ... 340 341

Comentarios a estos manuales

Sin comentarios