Lexmark X950dhe Guía de usuario Pagina 278

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 363
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 277
281 paper jam
Paper jam in door A
1 Open door A.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
2 Determine where the jam is located, and then remove it:
a If the paper is visible under the fuser, firmly grasp it on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
b If the paper is not visible, then you will need to remove the fuser unit.
Warning—Potential Damage: Do not touch the center of the fuser unit. Doing so will damage the fuser.
1 Remove the thumbscrew from each side of the fuser unit by rotating them counterclockwise.
2 Lift the handles on each side of the fuser, and then pull to remove the fuser unit.
2
1
1
3 Lift the green lever, firmly grasp the paper on each side, and then gently pull it out.
Notes:
• Make sure all paper fragments are removed.
• If the paper is in the fuser, then lower the fuser nip release lever and switch it to envelope mode.
• After removing the jammed paper, return the lever to the proper position.
Clearing jams 278
Vista de pagina 277
1 2 ... 273 274 275 276 277 278 279 280 281 282 283 ... 362 363

Comentarios a estos manuales

Sin comentarios